Use case · filter first, rank second
Apartment Outage Backup
Apartment backup means fume-free, generator-impossible power for a fridge shelf, router, lights, and phones — in a space where a 45 kg unit has nowhere to live. This page filters to battery units with at least ~450 Wh and 500 W output that one person can move (≤25 kg), then ranks on capacity, output, documented switchover and pass-through behavior, and recharge speed. Every unit in this index is a sealed battery — no exhaust, no fuel — which is the entire point for indoor use.
Machine summary · use_case · apartment-outage-backup
- use_case
- apartment-outage-backup
- method
- hard filters first, ranking second
- eligible_products
- 18
- disqualified_products
- 16
- top_recommendations
- bluetti-elite-200-v2, ecoflow-delta-2-max, oupes-2400, goal-zero-yeti-1500, pecron-e1500lfp
- dataset_updated
- 2026-08-02
- json_export
- /use-cases/apartment-outage-backup.json
This page ranks battery power stations only. That page ranks battery power stations only — which is the whole answer here. The cross-category guide exists to state plainly why fuel generators are excluded from apartment use rather than leaving the omission unexplained. Apartment Outage Backup: battery vs generator vs solar →
What matters for apartment outages
Indoor-safe by design
Battery units produce no fumes — the reason gas generators are disqualified from this entire index.
Practical capacity
An evening of router, lights, phones, and fridge-adjacent loads needs real watt-hours, not a power bank.
Pass-through + switchover
Documented pass-through and EPS/UPS behavior lets the unit live inline with your essentials year-round.
Recharge speed
When grid power flickers back, a fast AC input refills the buffer before the next drop.
Who this is for — and who should skip it
Good fit
- Renters and condo dwellers where generators are impossible
- Storm/grid-instability regions needing an evening-to-overnight bridge
- Anyone keeping a fridge, router, and phones alive through short outages
Skip this page if
- Whole-home hopes — apartment-practical units cannot run HVAC or a full panel; see home backup
- Desk-only needs — the home office page has lighter, cheaper picks
Hard disqualifiers (applied before any ranking)
- Battery capacity below ~450 Wh — cannot cover an evening of router, lights, and phone loads
- Continuous AC output below 500 W — too weak for outage support beyond device charging
- Unit weight above 25 kg — impractical to store and move in an apartment
16 of 34 indexed products are filtered out by these rules — each is listed below with its reason. Ranking only ever happens among the 18 products that pass.
Recommended for apartment outages
-
#1 BLUETTI Elite 200 V2
2,073.6 Wh LiFePO4 power station with 2,600 W continuous AC output, an official 1.4 h full recharge at 1,800 W, 1,000 W MPPT solar input, a 6,000-cycle battery (the highest cycle rating in this index), at 24.2 kg.
- 2,073.6 Wh / 2,600 W continuous
- Pass-through charging officially supported
- Switchover: Marketed as UPS; official docs describe EPS behavior
- Full wall recharge in 1 h 24 min
-
#2 EcoFlow DELTA 2 Max
2,048 Wh LiFePO4 power station with 2,400 W continuous AC output (4,800 W surge) across six outlets, 1,800 W X-Stream charging, up to 1,000 W dual-port solar input, and expansion to 6,144 Wh, at 23 kg.
- 2,048 Wh / 2,400 W continuous
- Pass-through charging officially supported
- Switchover: Marketed as UPS; official docs describe EPS behavior
-
#3 OUPES 2400
2,232 Wh LiFePO4 station rated 2,400 W continuous pure sine (5,000 W peak) across five NEMA 5-20R outlets, with a stated 0-100% AC recharge of 5.5 hours. Light for its class at 20.7 kg, but charging inputs are modest.
- 2,232 Wh / 2,400 W continuous
- Full wall recharge in 5 h 30 min
-
#4 Goal Zero Yeti 1500
1,505 Wh LiFePO4 power station with 2,000 W continuous AC output (3,600 W surge), a 1.1 h full wall recharge at 1,500 W, up to 900 W of solar input, 140 W USB-C, sub-15 ms automatic power switching, and a 5-year warranty.
- 1,505.28 Wh / 2,000 W continuous
- Pass-through charging officially supported
- Switchover: Marketed as UPS; official docs describe EPS behavior
- Full wall recharge in 1 h 6 min
-
#5 Pecron E1500LFP
1,536 Wh LiFePO4 power station with 2,200 W continuous AC output (4,400 W peak), 1,400 W wall charging for a 1.8 h full recharge, 1,000 W MPPT solar input, and expansion up to 9,216 Wh, at 17.4 kg.
- 1,536 Wh / 2,200 W continuous
- Pass-through charging officially supported
- Switchover: Marketed as UPS; official docs describe EPS behavior
- Full wall recharge in 1 h 48 min
Top picks compared
| Product | Capacity | Continuous AC | Weight | Pass-through | UPS / EPS |
|---|---|---|---|---|---|
| BLUETTI Elite 200 V2 | 2,073.6 Wh | 2,600 W | 24.2 kg (53.4 lb) | Yes | Marketed as UPS; official docs describe EPS behavior |
| EcoFlow DELTA 2 Max | 2,048 Wh | 2,400 W | 23 kg (50.7 lb) | Yes | Marketed as UPS; official docs describe EPS behavior |
| OUPES 2400 | 2,232 Wh | 2,400 W | 20.7 kg (45.6 lb) | Not documented | Not officially documented |
| Goal Zero Yeti 1500 | 1,505.28 Wh | 2,000 W | 23.93 kg (52.8 lb) | Yes | Marketed as UPS; official docs describe EPS behavior |
| Pecron E1500LFP | 1,536 Wh | 2,200 W | 17.4 kg (38.4 lb) | Yes | Marketed as UPS; official docs describe EPS behavior |
Also eligible (13)
These pass every hard filter but rank below the top picks under this page's scoring:
- Jackery Explorer 1000 Plus (1,264.64 Wh, fit score 406)
- EcoFlow DELTA 2 (1,024 Wh, fit score 392)
- EcoFlow DELTA 3 (1,024 Wh, fit score 392)
- Pecron E1000LFP (1,024 Wh, fit score 392)
- BLUETTI AC180 (1,152 Wh, fit score 375)
- Jackery Explorer 1000 v2 (1,070 Wh, fit score 337)
- Anker SOLIX C1000 (1,056 Wh, fit score 326)
- Anker SOLIX C800 Plus (768 Wh, fit score 307)
- OUPES Exodus 1200 (992 Wh, fit score 299)
- BLUETTI AC70 (768 Wh, fit score 287)
- Pecron E600LFP (614 Wh, fit score 221)
- Goal Zero Yeti 500 (499.2 Wh, fit score 210)
- Goal Zero Yeti 700 (677.37 Wh, fit score 208)
Filtered out, and why (16)
| Product | Disqualification reason |
|---|---|
| Anker SOLIX C300 | Capacity 288 Wh is below the ~450 Wh outage floor |
| Anker SOLIX F2000 | Weight 30.5 kg (67.2 lb) exceeds the 25 kg apartment ceiling |
| Anker SOLIX F3800 | Weight 60 kg (132.3 lb) exceeds the 25 kg apartment ceiling |
| BLUETTI AC200L | Weight 28.3 kg (62.4 lb) exceeds the 25 kg apartment ceiling |
| BLUETTI AC2A | Capacity 204.8 Wh is below the ~450 Wh outage floor |
| EcoFlow DELTA Pro | Weight 45 kg (99.2 lb) exceeds the 25 kg apartment ceiling |
| EcoFlow DELTA Pro 3 | Weight 51.5 kg (113.5 lb) exceeds the 25 kg apartment ceiling |
| EcoFlow DELTA Pro Ultra | Weight 82.4 kg (181.7 lb) exceeds the 25 kg apartment ceiling |
| EcoFlow RIVER 3 | Capacity 245 Wh is below the ~450 Wh outage floor |
| EcoFlow RIVER 3 Plus | Capacity 286 Wh is below the ~450 Wh outage floor |
| Goal Zero Yeti 300 | Capacity 296.96 Wh is below the ~450 Wh outage floor |
| Goal Zero Yeti 3000X | Weight 31.65 kg (69.8 lb) exceeds the 25 kg apartment ceiling |
| Goal Zero Yeti PRO 4000 | Weight 52.5 kg (115.7 lb) exceeds the 25 kg apartment ceiling |
| Jackery Explorer 2000 Plus | Weight 27.9 kg (61.5 lb) exceeds the 25 kg apartment ceiling |
| Jackery Explorer 300 Plus | Capacity 288 Wh is below the ~450 Wh outage floor |
| Jackery Explorer 3000 Pro | Weight 29 kg (63.9 lb) exceeds the 25 kg apartment ceiling |
Related comparisons
High Capacity: EcoFlow DELTA 2 Max vs BLUETTI AC200L vs BLUETTI Elite 200 V2 vs Jackery Explorer 2000 Plus vs EcoFlow DELTA Pro
Five US-market home-backup-class LiFePO4 stations from 2 to 3.6 kWh. They split on inverter strength (2,400–3,600 W), RV outlets (three of five have one), solar ceilings (1,000–1,600 W), expansion architecture, and longevity ratings from 3,000 to 6,000 cycles.
Mid Capacity: BLUETTI AC70 vs Pecron E600LFP vs Goal Zero Yeti 500 vs Goal Zero Yeti 700 vs Anker SOLIX C800 Plus
Five US-market LiFePO4 stations between 499 and 768 Wh. Output philosophy splits them: BLUETTI, Pecron, and Anker push 1,000–1,200 W inverters into this size class, while Goal Zero pairs smaller 500–600 W inverters with 4,000-cycle packs and sub-20 ms switching.
How this page decides
This page is generated from the index's normalized product records — official-manufacturer specifications with per-field provenance — using explicit fit rules, not editorial taste. Hard disqualifiers run first; ranking happens second, only among eligible products. Eligible products are scored as: capacity ×0.1, continuous output ×0.1, pass-through supported (+40), documented switchover (+40), full recharge in ≤1.5 h (+30).
No runtime hours or real-world measurements are invented: every number traces to the source claims on each product page. Merchant relationships never affect these rules. See the methodology for the full data policy, and the JSON version of this page for machine consumption.